Using a funnel add glitter until you have 1/2 to 1″ of glitter in there. Next mix 4 oz of water with 2 oz of clear elmer‘s glue in a fine tip squirt bottle. Carefully squirt about an inches worth into the hole in the bottom of the tumbler. Cover the hole with your finger and give it a good shake to mix the glitter.
How much glitter do you put in a Starbucks tumbler?
Using a funnel add glitter until you have 1/2 to 1″ of glitter in there. Next mix 4 oz of water with 2 oz of clear Elmer’s glue in a fine tip squirt bottle. Carefully squirt about an inches worth into the hole in the bottom of the tumbler. Cover the hole with your finger and give it a good shake to mix the glitter.
Is epoxy safe on starbucks cups?
Unlike epoxy, the crystalac cures by evaporation so there is no chemical reaction between the plastic and the Crystalac which is a major reason why people advise not to put epoxy on your Starbucks Cups !.
How do you seal a tumbler without epoxy?
There are various ways on how to seal a tumbler without using epoxy. You can apply CrystaLac, Mod Podge, or a clear acrylic spray instead. All have advantages and disadvantages, so choose the one that’s most convenient for you.
How do you make glitter float in water?
- Pour rubbing alcohol into the jar or bottle. Fill about one-quarter of the jar, then add a drop of food coloring
- Fill the container with vegetable oil, leaving about one-half inch on top.
- Add ultra-fine glitter
- Pour in water, filling the jar to the brim
- Secure the lid.
Is Brite tone and polyurethane the same?
Brite Tone is a High Solids, Waterbased Polyurethane that will build with less coats than traditional top coats. It self levels and leaves a super hard, Crystal Clear Top Coat. Excellent for use on Instruments, Tumblers, Bar Tops, Furniture and more.
What liquid is used in glitter tumblers?
If you use too much water, all of the glitter will fall to the bottom. You need about 60% water, 40% glycerin.
What liquid do you put in a snow globe tumbler?
If you go with the glue mix, you’ll need one part glue to two parts water I ended up using about two ounces of clear glue and four ounces of water for my mixture. Pour them into a measuring cup and stir to combine. Then, pour the mixture into an empty plastic squirt bottle.
Can you put epoxy on a plastic tumbler?
Avoid using plastic tumblers for this project. epoxy resin does not adhere to plastic and can peel off in time If your tumbler has a small amount of plastic on it, you can cover it with a plastic-compatible spray paint to give the resin something to hang onto.
How much glycerin do you put in a snow globe tumbler?
If you want a tumbler with tons of movement when it’s shake go with: 1/4 cup glycerin and 3/4 cups water.
How do you shake a snow globe at Starbucks?
Once you visit the Starbucks for Life website, the rules are all laid out. To start, you’ll first play a game on the Starbucks website. You “shake” a virtual snow globe, and you’ll either win an instant prize or collect a game piece. Collect three of the same game pieces in a row, and you’ll win a prize.
Do you need to seal vinyl on tumblers?
I do not seal my vinyl on tumblers. Most vinyl manufacturers actually recommend that you don’t apply a sealer over the vinyl The exception to this would be if you want to go through the process of sealing your tumbler with epoxy. This is usually done with glitter tumblers.
How do you keep glitter from clumping in a snow globe?
When you are satisfied with the snowglobe and how the glitter and objects look, put a ring of hot glue around the edge of the jars lid so that the lid is sealed onto the jar ).
What can I use instead of epoxy?
Hard plaster and concrete are excellent epoxy resin alternatives, and their use is not limited to small surfaces only. What is this? Unlike epoxy resin, concrete and plaster can be easily applied to large surfaces as well. Other great alternatives to epoxy resin include slush latex, metal, plastic, and alabaster.
What epoxy is best for tumblers?
- STONE COAT Art Coat Epoxy, Ultra UV Protection, food safe
- Art ‘N Glow Clear Casting and Coating Epoxy Resin
- Environmental Technology Kit Lite Pour-On, High Gloss Finish
- AFW Cup Turner,Tumbler Spineer Turner,Cup Spinner,Epoxy Cup Turner Supplies Crafts,with Epoxy Resin kit for Beginner.
Is epoxy and resin the same thing?
The main difference between both adhesive types is the drying time. Both epoxy and resin adhesives require mixing before use, but epoxy hardens much faster than resin glue Epoxy adhesive is far more expensive compared to resin glue since it has an excellent bonding capability that surpasses all type of adhesives.
What glue do you use for rhinestones?
Gem-Tac glue is the industry leader for gluing rhinestones onto fabric. This glue is ideal for bonding porous materials such as fabric, wood, and suede, as well as smooth surfaces such as glass, vinyl and metal. This terrific multi-purpose adhesive dries fast and clear and is waterproof.
How much glitter is needed for a snow globe?
Once everything stays in place it is time to add liquid and glitter. It is important to not fill water all the way to the top! A good ratio is 1 cup of water, 3 teaspoons glycerin, and 3 teaspoons glitter. Glycerin can be substituted for olive oil, vegetable oil, or baby oil.
Do you have to spray paint a tumbler before epoxy?
Unless you want to use an entire bottle of glitter to fully cover your tumbler, it’s a good idea to spray paint it first.
How do you make liquid shimmery?
- Mix the vodka, wine and simple syrup until well combined
- Stir in the petal luster dust
- Swirl the liqueur just before use, as the luster dust will settle to the bottom after a while.
- Chill until needed.
- FIND ALL THE FLAVORED SHIMMERY LIQUEUR RECIPES HERE.
How do you make liquid glitter?
- Purchase your supplies. Find glycerin at a pharmacy or a department store with a health and beauty department
- Mix 1/4 tsp. glycerin and 1 drop water in a bowl or small container
- Mix in the glitter
- Pour the mix into the storage container or bottle.
Can Mod Podge be used as a sealant?
It is a glue, sealer, and finish all in one The Mod Podge Hard Coat in particular has very tough properties that make it suitable for sealing furniture.
How do you keep vinyl from peeling off tumblers?
Weed the vinyl and apply transfer paper over it. Apply a piece of transfer tape to the vinyl decal that you removed. Then, with the paper backing, stick the decal on the glass where you want it.