All Keurigs have a needle that punctures the K-cup so that water can flow freely through the coffee This needle can clog with regular use, and if you don’t clean it out occasionally, your Keurig will slow down to a crawl. Why is water barely coming out of my Keurig? The most likely reason for … Read more
Keurigs last longer than most other automatic coffee makers but also cost more. Broadly speaking, you can expect to get between 3-5 years from your Keurig, assuming you maintain and clean it regularly. If you want the most bang for your buck, you should consider going with a manual brewer instead. How long do Keurigs … Read more
If water is leaking at the base of the machine, the K-cup holder could be cracked. This would allow water to seep through. First check near the K-cup holder of the machine to locate any possible cracks. Once found, the K-cup holder must be replaced using this guide. Why does water come out of the … Read more
Place a mug on the drip tray, then open and close the k-cup holder as if you were brewing a beverage. The brewing buttons on the control panel should blink to let you know the machine is ready. Press the “small cup” button to start brewing Let the brew cycle run, then pour out the … Read more
This happens when the pressure of the k-cup blows coffee grounds up the puncture needle and plugs it up Straighten a small paperclip and open the needle (if it is totally blocked). Then, run some water through it with no kcup to wash the loose grounds out. What does it mean when your Keurig says … Read more
The most likely reason for a Keurig not pumping water is water scaling, debris that builds up and interferes with the Keurig water pump There are a number of ways to resolve this problem. The simplest is to take out the keurig water reservoir, empty it out, and refill it about a third of the … Read more
The “port” on the bottom of the system was included to give us the future ability to give the brewer internet connectivity What is the port on the bottom of a Keurig? The “port” on the bottom of the system is similar to the port you would plug a landline phone into in your home … Read more
The most likely reason for a Keurig not pumping water is water scaling, debris that builds up and interferes with the Keurig water pump There are a number of ways to resolve this problem. The simplest is to take out the keurig water reservoir, empty it out, and refill it about a third of the … Read more
Why Does My Keurig not Brew a Full Cup? If your Keurig® is not brewing full cup it may be caused by one of the following: The exit needle is clogged by coffee grounds, tea, or cocoa mix Run a water-only cleaning cycle to free up any stuck particles. Why does my Keurig not fill … Read more
Your machine needs to be descaled Your brewer should be descaled every 3-6 months using this Keurig® descaling solution or distilled white vinegar. To reduce the build-up of scale in your brewer be sure to use filtered water (never tap or distilled). Why is my Keurig not putting out the right amount of water? The … Read more