A clogged Keurig is a common cause for most problems with your machine. If you have been using your keurig coffee brewer for more than six months, it’s likely that you need to have it cleaned. Luckily they have made the coffee maker easy to take apart which makes the cleaning process a whole lot … Read more
Press the BREW button to start the cleansing brew. The CARAFE button will illuminate red to indicate the heating plate is on when the cleansing brew is complete Press and hold the CARAFE button to turn the heating plate off, and pour the hot water into the sink. How do I reset the red light … Read more
If it doesn’t turn on you can try several things: check to make sure that the brewer is plugged securely ; unplug and plug in the brewer; plug the brewer into a different outlet. As the last step, Keurig even recommends resetting your home’s circuit breaker. If nothing works, it’s time to call Customer Support. … Read more
If everything on your machine looks right but your Keurig still won’t brew, it’s time for a reset. To reset your Keurig, open and close the brew head, and then turn it off and unplug it from the wall. Remove the water reservoir, if you can, and let the machine sit for at least half … Read more
A clogged keurig is a common cause for most problems with your machine If you have been using your keurig coffee brewer for more than six months, it’s likely that you need to have it cleaned. Luckily they have made the coffee maker easy to take apart which makes the cleaning process a whole lot … Read more
The primary cause for this type of problem is any type of blockage or water clog The first thing to do is check the tube within the coffee pot. If there are obstructions here, or if the tube is clogged, water or any other liquid will not be able to pass through. How do I … Read more
When your brewer stops brewing, one likely culprit is a tiny coffee ground clogging the “out” hole the coffee goes through If you open up your Keurig, you’ll see (or feel) a sharp needle in the top half (think where the top of the K-cup would be). That needle has a tiny hole in it. … Read more
Detach the water reservoir. If your water tank is removable, take it off and let the machine sit for another half an hour. Reattach the tank and plug the machine in. Reattach the water reservoir and plug the machine in. Why does my Keurig say add water when the reservoir is full? What to do … Read more
If your Keurig won’t brew, it may need to be reset The settings could be off, or the water reservoir could be incorrectly attached. Your brewer might also need to be descaled, a cleaning process that removes mineral buildup from the tank and tubes. How do I set up a new Keurig? Choose your pod … Read more
While holding your finger on the middle of the screen, turn the brewer back on. Continue to hold your finger on the screen for 5 seconds, until the Secret Menu appears How do I hard reset my Keurig? Turn off your brewer, then unplug it for a few minutes. Remove the water reservoir before you … Read more